Item # SL025, 25# Medium Release Liner On Strata-Tac

This liner is ideal for use when adding your own hot melt adhesive. The liner is ultra thin, laser printable, and lays flat even after hot melt adhesive is applied. Note the thin caliper can make it more challenging to use this liner on a patch applicator as the patch may want to fracture instead of cutting cleanly. Be sure to use a hard steel cut off blade.

Test Data
• Basis Weight: 25 lbs./ream (TAPPI T410)
• Initial Release: 5.0 grams/in.

Unit of Measure

General Information | Face Stock | Adhesives | Liner

General Information

Print Method	N/A Flexographic Laser - Home and Office Laser - Large Production Laser - LED Laser -Home and Office Off Set
Minimum Order Quantity	N/A 3000 MSI
Master Width	N/A 54 in
Lead Time	N/A 10 days
Weight Per 1000 MSI	N/A 63 lb
Overall Caliper	N/A 1.9 mil
Liner Caliper	N/A 1.9 mil

Face Stock

Face Stock	N/A Paper
Finish	N/A Matte
Color	N/A White

Adhesives

Adhesive

No Adhesive

Liner

Liner Type	N/A Kraft
Liner Weight	N/A 25#

General Information

Print Method

Minimum Order Quantity

Master Width

Lead Time

Weight Per 1000 MSI

Overall Caliper

Liner Caliper

Face Stock

Face Stock

Finish

Color

Adhesives

Adhesive

Liner

Liner Type

Liner Weight